Tisma.net

If you are planning to build a new house or you just want to make your house a better one then you should definitely consider home automation as your option. With home automation, not only you will be able to make the processes in your house easier but also you will make your house cooler.

There are several aspects in your home which you can implement automation and one of which is the security. With an automated security system, you will be able to make sure that your house is secured and no one will be able to break into your house. With proper settings and configuration, you will be able to have a well-secured home. You can use surveillance cameras to monitor what is happening inside and out of your house while you are away through the use of internet. You can access your surveillance cameras remotely by logging into a particular website provided that your surveillance camera is also connected to the internet.

Another place wherein you can implement automation is your garage. You can setup your garage door to automatically open if you would like to take your car for a ride. You can also use a remote control so that you no longer need to manually open the gate whenever you need to open it. All you need to do is to press a button and voila your garage door will open. The same thing goes if you are closing it.

You can also implement automation in your garden watering system. A lot of homeowners are now using this kind if automated systems so that they no longer need to water their gardens themselves since the system will automatically water the plants at a given time specified by the owner.

Automation is such a wonderful thing so what are you waiting for? Implement automation in your house now.

Most surveillance systems these days are wired and use a lot of cctv cabling. Whether it is RG59 Coax or UTP wiring ; there are a couple notes to keep in mind when building your system and selecting your cctv cable.

Cable Length

When purchasing your cctv cable for your surveillance system you need to know your lengths. Simply put you need to know how far it is from your camera to your DVR. When you figure out the length you have a couple options.

You can purchase a pre-made cable that is already cut and ready at a specific length, or you can get a custom cable made.

If you buy a pre-made cable you are going to want to purchase one that is at least 1 or 2 feet longer than what you need. The reason for this is because you don’t want a cable with a lot of tension in it; because it will put stress on your connectors and the cable itself. You also don’t want to have the cable be too much longer than your run because it will then sit coiled up next to your DVR and potentially cause interference within your surveillance system.

If you can’t find a pre-made cctv cable that fits within these parameters, you may want to consider getting a cable length cut by a professional. Now you can either have someone trained cut and crimp the cable for your system, or you can order the cable length and connectors and attempt to do it yourself.

If you plan to do it yourself; you need to be absolutely sure you know what you are doing. The reason being is because if you mess up the connection even slightly; you may end up with a bad connection with lower quality output or no output whatsoever. Furthermore if you mess up the crimp, you will end up having to cut it off and start again; which means you now have less cable to work with.

Honestly if you have any doubt about your crimping ability, it would be a wiser choice to pay the couple extra bucks and get a cable specifically made for your cctv system.

Cable Type

This topic can be expanded on in a lot of detail, but the two basics have to do with length and type.

Firstly you need to know what type of surveillance camera you have, and what type of connections it uses. This is pretty much a no brainer, but by knowing this you will know what type of cable you will need; or you will at least be able to tell a professional and they can determine the cctv cable you will need.

Secondly you should have the length of the cable run in mind. It is good to know this because after long distances your video signal can begin to degrade. Certain cctv cable types can help with this, depending on how long the run is.

When it comes to safety of your home or business, best security system is the optimal choice. In this article, I will explain the variety of video surveillance systems, and will focus on how to choose the most suitable for your needs security camera system.

Security cameras can be used anywhere indoor, outdoor, hidden and even on the vehicle. Regardless of the type of video surveillance set up, systems are designed to provide visual observation of the object by CCTV cameras. With latest surveillance equipment you can monitor protected premises as a single location or multiple locations at once.

There are digital and analog video surveillance systems.

Analog system uses video cassette recorder (VCR) to store footage received from security camera. Inability to view video over the internet and low recording quality is serious drawback for analog CCTV to compete with digital systems. Therefore manufacturers stopped producing analog systems and switched to digital, just like photo industry did.

Digital video surveillance systems based on the principle of binary encoding of information that improves performance reading and writing data speed, improves quality of the signal transmitted by the camera and allows off-site internet viewing. Most digital surveillance systems have motion activated recording. This function allows digital video recorder (DVR) to store footage on single hard drive for up to three month.

For better recording quality, get real-time DVR with D1 resolution. Greater number of frames per second is a key to smooth playback without glitches. Real-time recording stores images at 30fps and highest D1 resolution is 704×480 pixels. Viewtech Security specialists, with more than 8 years of experience in installation of surveillance systems, agree that in real life is enough if the recording speed will be about 15 frames per second. Not real-time systems cost less and since it takes half number of frames the recording time comes longer.

Viewing of video footage can be done directly from the DVR or remotely over the Internet Remote viewing works without zone restrictions; you can watch cameras remotely anywhere in the world. It is also possible to playback and backup information over the network.

When you select security camera it is worth paying attention to the following specifications: Resolution (Low – 380 TV Lines, Medium – 480 TV Lines, High – 700 TVL), Sensitivity (Low – 1 lux, Medium – 0.5 lux, High – 0,002 lux). A microphone will add sound in addition to image capture. Motorized zoom cameras (PTZ) can be controller remotely with ability to point in any direction and zoom enough to recognize license plate from 1000feet distance.

There are people more and more people choose to work from home than ever. The advantages of this are many including avoiding the morning and evening peak hours to be able to spend time with your children and significant others, so that everything in your own time. Although there are many pitfalls is that I have to focus in this article, the establishment of a secure wireless network for your home business. Right now, somewhere out there, because someone is waiting for a receiver to take over a person distrust Wireless Local Area Network. Their hope is to some sensitive information that can lead to identity theft Garner, stolen and proprietary information.

Most companies do not have more technical, but it may have for users, security is generally not one of the first things they want to fight with their daily activities. For over WLANs an excellent destination for information on predators.

Here are some general guidelines to follow when setting up your wireless network. Although it can vary from manufacturer to manufacturer may, at the base is more or less the same:

First Configuring wireless router via a point-wired client.
Always second to change your password for the factory setting, something difficult to guess for someone.
Enable third 128-bit Wired Equivalency Privacy (WEP) on both your access point and network card. From time to time, you change the WEP key entries. If your hardware does not support a minimum of 128-bit WEP encryption, it can replace the time that these dinosaurs. WEP is only a minimal security measure that is better than nothing.
Change the fourth show the factory settings for the SSID to access / router on a hard to guess changing channel. Start your computer to connect to this SSID configured by default.
5th Setup SSID of your access point is not sent, if necessary.
6th Block Anonymous Internet from requests and pings.
7th P2P connections should be disabled.
8th Enable MAC filtering.
9th Enable firewall disabled on the router / access point with DMZ. Enable Firewall client for each computer on the network.
10th Update router and access point updates are available.
11 Make sure the physical router so that a person can not randomly reset the hidden parameters.
12 Position of the physical router near the center of the town closest to the windows rather than to prevent third parties outside of the reception of signals.

These and other settings will work together to prevent intruders from your personal data.